Safety Cable Pull Switch (SRS)

Belt conveyor safety cable pull switches are designed for providing a switching system to isolate the power to the conveyor system and other equivalent process equipment in the emergency condition. The cable pull switches are actuated by a plastic coated steel wire, which is placed alongside the conveyor. When you pull on the cable at any point, it will trip and automatically lock the switches, de-energizing the conveyor starter contactor.

Each switch is bi-directional in operation and has two cables fitted to it from opposite directions, terminated with a spring at the anchor points. After tripping, the mechanical latch can be released only on the switch itself by the reset lever.

 

This product has the following applications:

    • Emergency or normal stop for below facilities

_x000D_

    • Conventional Belt Conveyors

_x000D_

    • Shuttle Conveyors

_x000D_

    • Bucket Elevators

_x000D_

    • Packaging Lines

_x000D_

    • Stockpile/Reclaim systems, Cranes, Shovels, Draglines

_x000D_

    • Ship Loading / Unloading System

_x000D_

    • Horizontal Feed Systems

_x000D_

 

This product has the following features:

    • Universal design for bi-direction activation

_x000D_

    • Compact design for tight-fit areas

_x000D_

    • IP67 rugged die-cast aluminum housing

_x000D_

    • Manual reset lever

_x000D_

    • Easily orientated at either end or intermediate position in pull cable run

_x000D_

    • Cable Pull 30 for shutting down system

_x000D_

    • Highly visible black arm easily shows condition of the switch, indicating alarm or normal

_x000D_

Download Data Sheet

Product Enquiry

"*" indicates required fields